Windows 7

Support for the Milan Intelligent interface, sold by Money Controls as the Paylink USB unit and for the earlier PCI card version.

Moderators: aardvark, davebush, Admin

Post Reply
Tony
Posts: 7
Joined: Wed Jul 18, 2007 1:23 pm

Windows 7

Post by Tony »

Hi,

I have just tried AESWDriver on a Windows 7 system and it cannot see Paylink.

I just get the:
11:53:35.412 PC: Driver start up
11:53:35.522 No matching USB Device
11:53:35.522 Retrying following failure....
sequence repeated.

Is there any fix for this?
davebush
Posts: 492
Joined: Fri Oct 22, 2004 12:20 pm

Post by davebush »

Hi,

We have just found a minor incompatibility between XP and Windows 7, which causes this.

We have now fixed this, and version 1.1.3.7 and later of AESWDriver will work with no problems. The link on our main web site: (http://www.aardvark.eu.com/downloads/so ... Driver.zip) will now download this version.
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.
rpedraza
Posts: 4
Joined: Sat Nov 10, 2012 2:32 pm

Re: Windows 7

Post by rpedraza »

The windows 7 driver is not available.....
Not Found

The requested URL /downloads/software/AESWDriver.zip was not found on this server.

Apache Server at www.aardvark.eu.com Port 80
davebush
Posts: 492
Joined: Fri Oct 22, 2004 12:20 pm

Re: Windows 7

Post by davebush »

Hi,

I'm very sorry about that, it's got erroneously deleted. It's back there now.

If you visit our download page at: http://www.aardvark.eu.com/products/milan/support.htm you can download our current SDK, which includes this latest driver.

Dave
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.
rpedraza
Posts: 4
Joined: Sat Nov 10, 2012 2:32 pm

Re: Windows 7

Post by rpedraza »

Thanks for the previus answer. I have a new one:

I have just downloaded the "Complete PC SDK" and installed in my windows 7 PC. Where do I need to put the Aesimhei.dll file??
davebush
Posts: 492
Joined: Fri Oct 22, 2004 12:20 pm

Re: Windows 7

Post by davebush »

There are a number of places that you can put DLLs so that applications can find them.

The three most common are:
  • In the same folder as the application(s) (only accessible by those application(s))
    In the C:\Windows\System folder (accessible by all applications) We recommend this
    If you are running 32 bit Windows 7, In the C:\Windows\System32 folder
    In the C:\Windows folder (accessible by all applications
Regards

Dave
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.
Post Reply