We are trying to obtain the serial number for a MCL compact coin dispenser MK2 and MK3. According to the new documentation the DispenserBlock should have Serial number and Description defined. However in the Delphi version, these are not defined even in the latest download. I have tried to add Serial number as a longint to the block, but it is always returned as 0.
Can you let me know what I should be doing ? is there a version of this Delphi file which has the correct definitions ?
Regards.
Coin Dispenser serial number
Moderators: aardvark, davebush, Admin
Hi,
If you check the documentation, you'll note that these are for version 1.11.x and later. The only version currently available on the web site is for version 1.10.x
We've just done a set of maintenance updates to 1.10.x and so have temporarily withdrawn the 1.11.x beta - it will rerturn soon.
If you check the documentation, you'll note that these are for version 1.11.x and later. The only version currently available on the web site is for version 1.10.x
We've just done a set of maintenance updates to 1.10.x and so have temporarily withdrawn the 1.11.x beta - it will rerturn soon.
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.
Hi,
As promised the 1.11.x beta has returned as 3.1.11.6 The full SDK (which you will need to access the new fields) can be downloaded from the download page at http://www.aardvark.eu.com/products/milan/downloads.htm.
As promised the 1.11.x beta has returned as 3.1.11.6 The full SDK (which you will need to access the new fields) can be downloaded from the download page at http://www.aardvark.eu.com/products/milan/downloads.htm.
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.