Hello, is the innovative smart coin system supported by the Paylink device? If so, which line should I use in the Standard.cfg file?
SmartHopper at 7 or SmartHopper with acceptor at 7?
Thank you so much.
smart coin system
Moderators: aardvark, davebush, Admin
Re: smart coin system
Hi,
You need:
SmartHopper with acceptor at 7
Historically there was just a smart hopper to which you could add a 3rd party acceptor. When they integrated an acceptor to make a Smart Coin they kept the same protocol.
If you use the Paylink command to dump all the commands, you will find that with the latest version the coin counts get confused. This will be fixed in 4.1.12.15, but a pre-release is available here: https://d.pr/f/SWszb5
Dave
You need:
SmartHopper with acceptor at 7
Historically there was just a smart hopper to which you could add a 3rd party acceptor. When they integrated an acceptor to make a Smart Coin they kept the same protocol.
If you use the Paylink command to dump all the commands, you will find that with the latest version the coin counts get confused. This will be fixed in 4.1.12.15, but a pre-release is available here: https://d.pr/f/SWszb5
Dave
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.