Standard.cfg file configuration

[xagduran]

Hi:
Where you can find information on how to configure the Standard.cfg file. It would be possible, by MDB or cctalk (it would be for the ICT BR2300 Wallet), to be able to change the values that it sends to the Paylink, for example, when it detects a 5-euro bill, it sends a 5, and we want it to send a 500, for a 10 euro bill, send a 10, and we want you to send a 1000. Through WriteAcceptorDetails, we see that in our program it changes, but it does not affect the wallet. Because as we also use at the same time, the CC6100E wallet, when it detects a 1 euro coin, sends 100, a 2 euro coin, sends a 200, etc., and there are equal values for different bills / coins (50 ticket euros and currency of 0.5 euros)
Thank you.
Greetings.
Angel.

[davebush]

HI,

1st - there is no way to configure the amount Paylink send to the API - by design Paylink scales all currency to the lowest coin - for Euros that would be 1c, so that for €5 it would report 500.

2nd - It appears that you are reporting a fault whereby Paylink has scaled the notes from a BR2300 wrongly. If this is the case can you obtain a log of the initialisation of the device, that way I can see what Paylink has read from the device. Instructions for obtaining a clean startup log are at: http://www.aardvark.eu.com/downloads/do ... inkLog.pdf

Thanks

Dave

[xagduran]

Acceptors on the system are:
Acceptor 0: ccTalk Coin - <~~~~>, Serial Number 0,
Default Path 0, Currency <>, 0 coins:
Acceptor 1: MDB Level 3 Changer - <1978~2~ICT~CCM6-EUR MDB~0552>, Serial Number 211392708,
Default Path 0, Currency <978>, 6 coins:
Coin 0: <5*1>, Value 5, Count 0, Path 1, Coins 4, Default Path -1
Coin 1: <10*1>, Value 10, Count 0, Path 2, Coins 2, Default Path -1
Coin 2: <20*1>, Value 20, Count 0, Path 3, Coins 1, Default Path -1
Coin 3: <50*1>, Value 50, Count 0, Path 4, Coins 31, Default Path -1
Coin 4: <100*1>, Value 100, Count 0, Path 5, Coins 100, Default Path -1
Coin 5: <200*1>, Value 200, Count 0, Path 6, Coins 15, Default Path -1
Acceptor 2: MBD Bill - <1978~0~ICT~BR2300-EUR40~0115>, Serial Number -898637388,
Default Path 0, Currency <978>, 4 coins:
Coin 0: <5*1>, Value 5, Count 0, Path 0, Coins 0
Coin 1: <10*1>, Value 10, Count 0, Path 0, Coins 0
Coin 2: <20*1>, Value 20, Count 0, Path 0, Coins 0
Coin 3: <50*1>, Value 50, Count 0, Path 0, Coins 0

Dispensers on the system are:
Dispenser 0: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 5, Number Paid 0, Current Count 0
Inhibit 1, Address 9
Dispenser 1: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 10, Number Paid 0, Current Count 0
Inhibit 1, Address 10
Dispenser 2: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 20, Number Paid 0, Current Count 0
Inhibit 1, Address 11
Dispenser 3: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 50, Number Paid 0, Current Count 0
Inhibit 1, Address 12
Dispenser 4: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 100, Number Paid 0, Current Count 0
Inhibit 1, Address 13
Dispenser 5: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 200, Number Paid 0, Current Count 0
Inhibit 1, Address 14
Dispenser 6: MDB Payout System - <Level 3 Payout System>, Serial Number 211392708,
Coin Value 1, Number Paid 0,
Inhibit 0, Address 8

[xagduran]

15:29:49.603 FTDI Chip recovery
15:29:49.603 USB: Genoa Recovery: Reset Device 4/4
15:29:49.902 Genoa Closed
15:29:49.918 No matching USB Device
15:29:50.440 USB: No Device!
15:29:51.039 USB: Unit 0, ID: 0x0403 0xde50
15:29:51.039 Description: Genoa USB Hub
15:29:51.039 Serial No: AE000001
15:29:51.055 Type: Revision 4 (USB Powered)
15:29:51.055 Latency: 16
15:29:51.058 USB: Genoa Recovery: Opened 0/0
15:29:51.058 Recovery: 5066757 Fixed!
15:29:52.726 Configuration
15:29:52.726 cctalk protocol on port 0
15:29:52.758 Coin Acceptor at 2
15:29:52.774 DP: ccCoin Pre reg, Addr 2
15:29:52.822 MDB protocol on port 3
15:29:52.870 Changer at 8
15:29:52.886 DP: MDB Pre reg, Addr 8
15:29:52.944 Bill Acceptor at 48
15:29:52.944 DP: MDB Bill Pre reg, Addr 48
15:29:52.977 Cashless at 16
15:29:52.992 DP: Cashless 0 setup
15:29:53.025 === End ===
15:29:53.103 SEC Meter
15:29:53.103 Port 0 - cctalk protocol
15:29:53.103 Port 1 - Default protocol
15:29:53.103 Port 2 - Monitor protocol
15:29:53.103 Port 3 - MDB protocol
15:29:53.103 DP: Part: -1, Serial: 19905
15:29:53.224 Exec: DP task took 124 msec
15:29:53.224 Config: Start of download
15:29:53.261 Config: Checked, OK
15:29:53.261 Config: Paylink Checked OK against file "Standard.cfg"
15:29:53.261 Exec: USB task took 36 msec
15:29:53.262 PC: Memory Resynch - new protocol
15:29:53.368 DP: ccCoin acceptor 2020000 at ba0 setup
15:29:53.388 DP: MDB acceptor 2090000 at bdc setup
15:29:53.409 DP: MDB Bill acceptor 12080000 at c14 setup
15:29:53.429 *** PC: Basic Resync fail @54, 1120<>c4c
15:29:53.429 DP: Cashless system at 3148setup
15:29:53.615 DP: Interface memory set up
15:29:53.615 Exec: DP task took 337 msec
15:29:53.615 8396 bytes memory free
15:29:53.667 MDB Bill: Device Status reply < 11 bytes
15:29:53.730 MDB Bill: Changer level 2, Currency 978, with Escrow
15:29:53.730 MDB Bill: Bill 1, value 5
15:29:53.730 MDB Bill: Bill 2, value 10
15:29:53.730 MDB Bill: Bill 3, value 20
15:29:53.730 MDB Bill: Bill 4, value 50
15:29:53.775 MDB Bill: Manu: ICT, Ser # 170900054452, Model BR2300-EUR40
15:29:53.794 DP: MDB Bill acceptor 12080000 at c14 and 4 coins updated
15:29:53.846 Exec: MDB task took 75 msec
15:29:53.846 MDB Bill: Inhibit all Bills
15:29:53.862 MDB Bill: Bill Acceptor Reset!
15:29:53.930 MDB: Changer level 3, Currency 978
15:29:53.930 MDB: Coin 1, value 5, to tube 1
15:29:53.930 MDB: Coin 2, value 10, to tube 2
15:29:53.930 MDB: Coin 3, value 20, to tube 3
15:29:53.930 MDB: Coin 4, value 50, to tube 4
15:29:53.930 MDB: Coin 5, value 100, to tube 5
15:29:53.930 MDB: Coin 6, value 200, to tube 6
15:29:53.930 Exec: MDB task took 30 msec
15:29:53.962 MDB: Manu: ICT, Ser # 180600019140, Model CCM6-EUR MDB, diag. avail, Extended Payout
15:29:54.032 MDB Tube@9: for 5 - reported coins 0=>0
15:29:54.032 MDB Tube@10: for 10 - reported coins 0=>0
15:29:54.032 MDB Tube@11: for 20 - reported coins 0=>0
15:29:54.032 MDB Tube@12: for 50 - reported coins 0=>0
15:29:54.032 MDB Tube@13: for 100 - reported coins 0=>4
15:29:54.032 MDB Tube@14: for 200 - reported coins 0=>0
15:29:54.051 DP: MDB acceptor 2080000 at bdc and 6 coins updated
15:29:54.192 DP: Level 2 Tube Hopper S/N 211392708, Address 9, Value 5 at f4c added
15:29:54.232 DP: Level 2 Tube Hopper S/N 211392708, Address 10, Value 10 at f98 added
15:29:54.272 DP: Level 2 Tube Hopper S/N 211392708, Address 11, Value 20 at fe4 added
15:29:54.311 DP: Level 2 Tube Hopper S/N 211392708, Address 12, Value 50 at 1030 added
15:29:54.351 DP: Level 2 Tube Hopper S/N 211392708, Address 13, Value 100 at 107c added
15:29:54.391 DP: Level 2 Tube Hopper S/N 211392708, Address 14, Value 200 at 10c8 added
15:29:54.430 DP: Level 3 Payout System Hopper S/N 211392708, Address 8, Value 1 at 1114 added
15:29:54.430 Exec: MDB task took 415 msec
15:29:54.515 Exec: DP task took 70 msec
15:29:54.515 MDB: Inhibit all coins
15:29:54.515 MDB: Changer Reset!
15:29:55.490 MDB Bill: Inhibit all Bills
15:29:55.554 MDB: Inhibit all coins
15:29:55.707 MDB: Selftest OK
15:29:55.707 DP: MDB Status to 4
15:29:59.396 7204 bytes memory free

[davebush]

Hi,

Well there are at least two problems!

1/ You appear to be running Firmware that is older than 4.1.12.10 and so does not support the BR2300 in cctalk, or any MDB Recycler. The latest firmware is at: http://www.aardvark.eu.com/downloads/so ... -12-11.zip
2/ From the line echoed below, the BR2300 appears to be set up as a level 2 acceptor only - MDB recyling is only available at level 3

15:29:53.730 MDB Bill: Changer level 2, Currency 978, with Escrow

Regards

Dave

[xagduran]

MDB recycling is only available at level 3 (this is how it is connected by MDB). We are newbies and we don't know.
Thank you.

[xagduran]

Hi:
We have changed the firmware for which you sent us, and still doing the same.
What can be?
Attached log capture.

------------------------------
Acceptors on the system are:
Acceptor 0: ccTalk Coin - <~~~~>, Serial Number 0,
Default Path 0, Currency <>, 0 coins:
Acceptor 1: MDB Level 3 Changer - <1978~2~ICT~CCM6-EUR MDB~0552>, Serial Number 211392708,
Default Path 0, Currency <978>, 6 coins:
Coin 0: <5*1>, Value 5, Count 0, Path 1, Coins 0, Default Path -1
Coin 1: <10*1>, Value 10, Count 0, Path 2, Coins 0, Default Path -1
Coin 2: <20*1>, Value 20, Count 0, Path 3, Coins 0, Default Path -1
Coin 3: <50*1>, Value 50, Count 0, Path 4, Coins 0, Default Path -1
Coin 4: <100*1>, Value 100, Count 0, Path 5, Coins 0, Default Path -1
Coin 5: <200*1>, Value 200, Count 0, Path 6, Coins 0, Default Path -1
Acceptor 2: MBD Bill - <1978~0~ICT~BR2300-EUR40~0115>, Serial Number -898637388,
Default Path 0, Currency <978>, 4 coins:
Coin 0: <5*1>, Value 5, Count 0, Path 1, Coins 0
Coin 1: <10*1>, Value 10, Count 0, Path 0, Coins 0
Coin 2: <20*1>, Value 20, Count 0, Path 0, Coins 0
Coin 3: <50*1>, Value 50, Count 0, Path 0, Coins 0

Dispensers on the system are:
Dispenser 0: Unknown code 11080001 - <MDB Dispenser>, Serial Number -898637388,
Coin Value 5, Number Paid 0, Current Count 0
Inhibit 0, Address 96
Dispenser 1: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 5, Number Paid 0, Current Count 0
Inhibit 1, Address 9
Dispenser 2: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 10, Number Paid 0, Current Count 0
Inhibit 1, Address 10
Dispenser 3: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 20, Number Paid 0, Current Count 0
Inhibit 1, Address 11
Dispenser 4: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 50, Number Paid 0, Current Count 0
Inhibit 1, Address 12
Dispenser 5: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 100, Number Paid 0, Current Count 6
Inhibit 1, Address 13
Dispenser 6: MDB Tube - <Level 2 Tube>, Serial Number 211392708,
Coin Value 200, Number Paid 0, Current Count 0
Inhibit 1, Address 14
Dispenser 7: MDB Payout System - <Level 3 Payout System>, Serial Number 211392708,
Coin Value 1, Number Paid 0,
Inhibit 0, Address 8
--------------------------------------

AES Intelligent Money Handling Equipment Interface
OS Version 6.2
Checking Driver Files:
Not Found (<C:\WINDOWS\system32\Drivers\AesIMHEI.sys>/<C:\WINDOWS


Checking DLL:
Found at: C:\Users\Anxo\Desktop\Central de Pagos\Documentacion\Paylink Timestamp : Tue Sep 12 12:35:18 201712 12:35:18 201712 12:35:18 2017
Version 1.6.1.2

Details on AES Genoa USB Interface Unit
AES Intelligent Money Handling Equpiment:
Interface 9, code version 04010c0b


Firmware Release Type: Full
Firmware Code Version: 1.12.11
-----------------------------


Thank you

[xagduran]

Hi:
One clarification, the BR2300 recycler is connected by MDB.
In case it works.
Thank you

[davebush]

Hi,

It looks as though there's a problem with the way the BR2300 is set up. To be sure I need:
1/ The conmtnts of the Log tab from MilanDiag, not the System tab.
2/ I deally that you turn on the low level diagnositcs using "d mdb" as described in the document before starting.

Thanks

Dave

[xagduran]

AES Intelligent Money Handling Equipment Interface
OS Version 6.2
Checking Driver Files:
Not Found (<C:\WINDOWS\system32\Drivers\AesIMHEI.sys>/<C:\WINDOWS


Checking DLL:4.1.12.8-9\release versión\distribution 4-1-12-81\AESImhei.dll
Found at: C:\Users\Anxo\Desktop\Central de Pagos\Documentacion\Paylink Timestamp : Tue Sep 12 12:35:18 2017
Version 1.6.1.2

Details on AES Genoa USB Interface Unit
AES Intelligent Money Handling Equpiment:
Interface 9, code version 04010c0b


Firmware Release Type: Full
Firmware Code Version: 1.12.11

[davebush]

Sorry, bad choice of words - I need the "Diagnostic Output" tab.

If you look in the document you can see a picture with lines like:
> [00] [00] [00]
these are Paylink sending messages to the peripheral. If you follow the instructions and type 'd mdb' then you should see these coming out slowly, and then when you plug in the BR2300 they should suddenly get more complicated and rapid.

Dave

[xagduran]

8:06:50.427 cctalk: == 6101: > [28] [00] [01] [fe] [d9]
18:06:50.849 5868 bytes memory free
18:06:55.490 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:00.569 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:05.632 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:10.711 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:15.789 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:17.743 00:11
18:07:20.856 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:25.925 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:31.005 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:36.079 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:41.139 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:46.225 cctalk: == 5085: > [28] [00] [01] [fe] [d9]
18:07:51.287 cctalk: == 5085: > [28] [00] [01] [fe] [d9]

[davebush]

Those are from the cctalk handler.

the document shows typing 'd cct', but I asked you to type 'd mbd' to get the MDB handler diagnostics.

[xagduran]

26 March 2020 Driver:4.1.12.81
11:54:56.954 PC: Paylink Driver startup
11:54:56.954 Driver Thread Started
11:54:56.954






11:54:56.954 PC: Driver start up
11:54:57.063 USB: Unit 0, ID: 0x0403 0xde50
11:54:57.063 Description: Genoa USB Hub
11:54:57.063 Serial No: AE000001
11:54:57.079 Type: Revision 4 (USB Powered)
11:54:57.079 Latency: 16
11:54:57.141 Config: Start of download
11:54:57.188 Config: Checked, OK
11:54:57.188 Config: Paylink Checked OK against file "Standard.cfg"
11:54:57.188 Exec: USB task took 31 msec
11:54:57.204 PC: Memory Reset - new protocol
11:54:57.391 DP: ccNote acceptor 12020000 at ba0 setup
11:54:57.438 DP: MDB acceptor 2080000 at bdc and 6 coins setup
11:54:57.641 DP: MDB Bill acceptor 12080000 at db0 setup
11:54:57.704 DP: Level 2 Tube Hopper S/N 211392708, Address 14, Value 200 at de8 setup
11:54:57.751 DP: Level 2 Tube Hopper S/N 211392708, Address 13, Value 100 at e34 setup
11:54:57.797 DP: Level 2 Tube Hopper S/N 211392708, Address 12, Value 50 at e80 setup
11:54:57.844 DP: Level 2 Tube Hopper S/N 211392708, Address 11, Value 20 at ecc setup
11:54:57.891 DP: Level 2 Tube Hopper S/N 211392708, Address 10, Value 10 at f18 setup
11:54:57.938 DP: Level 2 Tube Hopper S/N 211392708, Address 9, Value 5 at f64 setup
11:54:57.985 DP: Level 3 Payout System Hopper S/N 211392708, Address 8, Value 1 at fb0 setup
11:54:58.204 DP: Interface memory set up
11:54:58.219 Exec: DP task took 990 msec
11:55:02.698 6440 bytes memory free
11:55:09.154 d mdb
11:55:09.154 Task: MDB, debug on
11:55:09.154 $ MDB: 90: > [0b] [0b]
11:55:09.185 MDB: 3: < {00}
11:55:09.279 MDB: 91: > [0b] [0b]
11:55:09.279 MDB: 3: < {00}
11:55:09.357 MDB: 91: > [0b] [0b]
11:55:09.388 MDB: 3: < {00}
11:55:09.388 MDB: 11: > [31] [31]
11:55:09.513 MDB: 140: > [0b] [0b]
11:55:09.529 MDB: 3: < {00}
11:55:09.607 MDB: 91: > [0b] [0b]
11:55:09.622 MDB: 3: < {00}
11:55:09.716 MDB: 91: > [0b] [0b]
11:55:09.732 MDB: 3: < {00}
11:55:09.810 MDB: 91: > [0b] [0b]
11:55:09.826 MDB: 3: < {00}
11:55:09.919 MDB: 91: > [0b] [0b]
11:55:09.919 MDB: 3: < {00}
11:55:09.997 MDB: 91: > [0b] [0b]
11:55:10.013 MDB: 3: < {00}
11:55:10.091 MDB: 91: > [0b] [0b]
11:55:10.107 MDB: 3: < {00}
11:55:10.185 MDB: 91: > [0b] [0b]
11:55:10.201 MDB: 3: < {00}
11:55:10.279 MDB: 91: > [0b] [0b]
11:55:10.294 MDB: 3: < {00}
11:55:10.372 MDB: 91: > [0b] [0b]
11:55:10.404 MDB: 3: < {00}
11:55:10.404 MDB: 11: > [31] [31]
11:55:10.529 MDB: 141: > [0a] [0a]
11:55:10.607 MDB: == -21: 21 < [00] [00] [00] [00] [00] [1c] [29] [19] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [5e]
11:55:10.607 MDB: 0: > ACK
11:55:10.607 MDB: 9: > [0f] [05] [14]
11:55:10.607 MDB: == -3: 3 < [06] [00] [06]
11:55:10.607 MDB: 0: > ACK
11:55:10.607 MDB: 3: > [0b] [0b]
11:55:10.607 MDB: 4: < {00}
11:55:10.685 MDB: 91: > [0b] [0b]
11:55:10.701 MDB: 3: < {00}
11:55:10.779 MDB: 92: > [0b] [0b]
11:55:10.794 MDB: 3: < {00}
11:55:10.872 MDB: 91: > [0b] [0b]
11:55:10.888 MDB: 3: < {00}
11:55:10.966 MDB: 91: > [0b] [0b]
11:55:10.982 MDB: 3: < {00}
11:55:11.076 MDB: 91: > [0b] [0b]
11:55:11.076 MDB: 3: < {00}
11:55:11.169 MDB: 91: > [0b] [0b]
11:55:11.169 MDB: 3: < {00}
11:55:11.247 MDB: 91: > [0b] [0b]
11:55:11.263 MDB: 3: < {00}
11:55:11.341 MDB: 91: > [0b] [0b]
11:55:11.357 MDB: 3: < {00}
11:55:11.451 MDB: 81: > [31] [31]
11:55:11.513 MDB: 61: > [0b] [0b]
11:55:11.513 MDB: 3: < {00}
11:55:11.607 MDB: 91: > [0b] [0b]
11:55:11.607 MDB: 3: < {00}
11:55:11.685 MDB: 91: > [0b] [0b]
11:55:11.701 MDB: 3: < {00}
11:55:11.779 MDB: 91: > [0b] [0b]
11:55:11.794 MDB: 3: < {00}
11:55:11.904 MDB: 91: > [0b] [0b]
11:55:11.904 MDB: 3: < {00}
11:55:11.982 MDB: 91: > [0b] [0b]
11:55:11.998 MDB: 3: < {00}
11:55:12.076 MDB: 91: > [0b] [0b]
11:55:12.091 MDB: 4: < {00}
11:55:12.185 MDB: 101: > [0a] [0a]
11:55:12.201 MDB: == -21: 21 < [00] [00] [00] [00] [00] [1c] [29] [19] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [5e]
11:55:12.232 MDB: 0: > ACK
11:55:12.232 MDB: 9: > [0f] [05] [14]
11:55:12.232 MDB: == -3: 3 < [06] [00] [06]
11:55:12.232 MDB: 0: > ACK
11:55:12.232 MDB: 3: > [0b] [0b]
11:55:12.232 MDB: 4: < {00}
11:55:12.326 MDB: 91: > [0b] [0b]
11:55:12.341 MDB: 3: < {00}
11:55:12.419 MDB: 91: > [0b] [0b]
11:55:12.435 MDB: 3: < {00}
11:55:12.482 MDB: 51: > [31] [31]
11:55:12.576 MDB: 91: > [0b] [0b]
11:55:12.576 MDB: 3: < {00}
11:55:12.669 MDB: 91: > [0b] [0b]
11:55:12.669 MDB: 3: < {00}
11:55:12.748 MDB: 91: > [0b] [0b]
11:55:12.763 MDB: 3: < {00}
11:55:12.841 MDB: 91: > [0b] [0b]
11:55:12.873 MDB: 3: < {00}
11:55:12.951 MDB: 91: > [0b] [0b]
11:55:12.966 MDB: 4: < {00}
11:55:13.044 MDB: 91: > [0b] [0b]
11:55:13.060 MDB: 3: < {00}
11:55:13.154 MDB: 91: > [0b] [0b]
11:55:13.154 MDB: 3: < {00}
11:55:13.232 MDB: 91: > [0b] [0b]
11:55:13.248 MDB: 3: < {00}
11:55:13.326 MDB: 91: > [0b] [0b]
11:55:13.341 MDB: 3: < {00}
11:55:13.419 MDB: 91: > [0b] [0b]
11:55:13.435 MDB: 3: < {00}
11:55:13.482 MDB: 51: > [31] [31]
11:55:13.591 MDB: 91: > [0b] [0b]
11:55:13.591 MDB: 4: < {00}
11:55:13.654 6008 bytes memory free
11:55:13.669 MDB: 91: > [0b] [0b]
11:55:13.685 MDB: 3: < {00}
11:55:13.766 MDB: 91: > [0b] [0b]
11:55:13.781 MDB: 3: < {00}
11:55:13.875 MDB: 101: > [0a] [0a]
11:55:13.891 MDB: == -21: 21 < [00] [00] [00] [00] [00] [1c] [29] [19] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [5e]
11:55:13.937 MDB: 0: > ACK
11:55:13.937 MDB: 10: > [0f] [05] [14]
11:55:13.937 MDB: == -2: 2 < [06] [00] [06]
11:55:13.937 MDB: 0: > ACK
11:55:13.937 MDB: 4: > [0b] [0b]
11:55:13.937 MDB: 3: < {00}
11:55:14.031 MDB: 91: > [0b] [0b]
11:55:14.031 MDB: 3: < {00}
11:55:14.109 MDB: 91: > [0b] [0b]
11:55:14.125 MDB: 3: < {00}
11:55:14.219 MDB: 91: > [0b] [0b]
11:55:14.219 MDB: 3: < {00}
11:55:14.297 MDB: 91: > [0b] [0b]
11:55:14.312 MDB: 3: < {00}
11:55:14.406 MDB: 91: > [0b] [0b]
11:55:14.406 MDB: 3: < {00}
11:55:14.484 MDB: 91: > [0b] [0b]
11:55:14.500 MDB: 3: < {00}
11:55:14.516 MDB: 21: > [31] [31]
11:55:14.656 MDB: 121: > [0b] [0b]
11:55:14.656 MDB: 4: < {00}
11:55:14.734 MDB: 91: > [0b] [0b]
11:55:14.750 MDB: 3: < {00}
11:55:14.828 MDB: 91: > [0b] [0b]
11:55:14.844 MDB: 3: < {00}
11:55:14.922 MDB: 91: > [0b] [0b]
11:55:14.938 MDB: 3: < {00}
11:55:15.047 MDB: 91: > [0b] [0b]
11:55:15.047 MDB: 3: < {00}
11:55:15.125 MDB: 91: > [0b] [0b]
11:55:15.141 MDB: 3: < {00}
11:55:15.219 MDB: 91: > [0b] [0b]
11:55:15.234 MDB: 4: < {00}
11:55:15.313 MDB: 91: > [0b] [0b]
11:55:15.328 MDB: 3: < {00}
11:55:15.422 MDB: 91: > [0b] [0b]
11:55:15.422 MDB: 3: < {00}
11:55:15.516 MDB: 101: > [0a] [0a]
11:55:15.578 MDB: == -21: 21 < [00] [00] [00] [00] [00] [1c] [29] [19] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [5e]
11:55:15.578 MDB: 0: > ACK
11:55:15.578 MDB: 9: > [0f] [05] [14]
11:55:15.578 MDB: == -3: 3 < [06] [00] [06]
11:55:15.578 MDB: 0: > ACK
11:55:15.578 MDB: 3: > [0b] [0b]
11:55:15.578 MDB: 4: < {00}
11:55:15.578 MDB: 1: > [31] [31]
11:55:15.734 MDB: 150: > [0b] [0b]
11:55:15.734 MDB: 3: < {00}
11:55:15.813 MDB: 91: > [0b] [0b]
11:55:15.828 MDB: 3: < {00}
11:55:15.922 MDB: 91: > [0b] [0b]
11:55:15.922 MDB: 3: < {00}
11:55:16.000 MDB: 91: > [0b] [0b]
11:55:16.016 MDB: 3: < {00}
11:55:16.094 MDB: 91: > [0b] [0b]
11:55:16.109 MDB: 4: < {00}
11:55:16.188 MDB: 91: > [0b] [0b]
11:55:16.203 MDB: 3: < {00}
11:55:16.297 MDB: 91: > [0b] [0b]
11:55:16.313 MDB: 3: < {00}
11:55:16.406 MDB: 91: > [0b] [0b]
11:55:16.406 MDB: 3: < {00}
11:55:16.484 MDB: 91: > [0b] [0b]
11:55:16.500 MDB: 3: < {00}
11:55:16.578 MDB: 91: > [0b] [0b]
11:55:16.594 MDB: 3: < {00}
11:55:16.594 MDB: 1: > [31] [31]
11:55:16.750 MDB: 150: > [0b] [0b]
11:55:16.750 MDB: 3: < {00}
11:55:16.844 MDB: 91: > [0b] [0b]
11:55:16.844 MDB: 3: < {00}
11:55:16.922 MDB: 91: > [0b] [0b]
11:55:16.938 MDB: 3: < {00}
11:55:17.031 MDB: 91: > [0b] [0b]
11:55:17.047 MDB: 3: < {00}
11:55:17.141 MDB: 91: > [0b] [0b]
11:55:17.141 MDB: 3: < {00}
11:55:17.235 MDB: 101: > [0a] [0a]
11:55:17.250 MDB: == -20: 20 < [00] [00] [00] [00] [00] [1c] [29] [19] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [5e]
11:55:17.297 MDB: 0: > ACK
11:55:17.297 MDB: 10: > [0f] [05] [14]
11:55:17.297 MDB: == -2: 2 < [06] [00] [06]
11:55:17.297 MDB: 0: > ACK
11:55:17.297 MDB: 4: > [0b] [0b]
11:55:17.297 MDB: 3: < {00}
11:55:17.391 MDB: 92: > [0b] [0b]
11:55:17.391 MDB: 3: < {00}
11:55:17.469 MDB: 91: > [0b] [0b]
11:55:17.485 MDB: 3: < {00}
11:55:17.563 MDB: 91: > [0b] [0b]
11:55:17.578 MDB: 3: < {00}
11:55:17.656 MDB: 71: > [31] [31]
11:55:17.719 MDB: 71: > [0b] [0b]
11:55:17.719 MDB: 3: < {00}
11:55:17.797 MDB: 91: > [0b] [0b]
11:55:17.813 MDB: 3: < {00}
11:55:17.906 MDB: 91: > [0b] [0b]
11:55:17.906 MDB: 3: < {00}

******* Diagnostic Capture Paused ********

[davebush]

This is getting closer, but you've not started capturing the log until after all the initial queries are complete.

You should have reset everything and then plugged the device in after you had typed 'd mdb'

At first you should only see a message every few seconds (like when you typed 'd cct') while Paylink is testing to see if anything is there.