Innovative firmware and EBDS support

[Julien]

Hi,

Once I install 1.12.10 firmware in order to support Innovative Smart Hopper, the Paylink says this firmware does not support EBDS protocol. I was using with success a MEI SCR bill validator with the previous firmware, but seems that with the last Innovative firmware I can't use both devices in the same time (innovative Hopper with cctalk and MEI SCR with EBDS).
Is there any way to solve this problem ?I tried older "Innovative" firmwares : 1.12.9 and 1.12.72 work with EBDS protocol, but they both don't work with Innovative Smart Hopper...
Would it be possible to get a firmware compatible with both equipments or is there any other solution ?
Many thanks in advance for help.
Regards

[davebush]

I have created a firmware load called InnEbdVx.x.x.x which you can get from https://d.pr/f/IN1Cwc

Can you please check that it does what you want. If it's OK, then all future releases of Paylink will include this load.

Regards

Dave

[Julien]

Hi Dave,

I have tested with sucess the new firmware, I can confirm that it works both with Innovative Smart Coin System (cctalk protocol) and MEI SCR note acceptor (EBDS protocol).
Many thxs once again for the support.
Regards,

Julien

[davebush]

Great.

A release version should be out in the next month or so.

Dave