Hi,
Yesterday we test the paylink with the SR5i, Arcade Elite And Only one Hopper because we only have a Cctalk Cable For SCH2 Hopper Adress 4. We test the demo with a Hopper set for a $100 (100 Pesos Colombian Currency). But when I click the payout button on the demo for two (2) coins, the Hopper Payout four(4) Coins. When I try To pay 4 the hopper PayOut 8....... What can be the problem?. maybe it's issue is for the Cctalk Adress?.
Aditionally : I purchase tree Hoppers; One for $ 500 coins, $ 200 coins and $100 coins. I have only one cable for adress 4; that came with the develpment kit. I need to get a cable for adress 3 and 5 ? it's that rigth?. because I need to contact the provider in USA.
Best regards.
Victor H
Colombia
Hopper PayOut
Moderators: aardvark, davebush, Admin
Re: Hopper PayOut
Hi Victor,
1/ Can you double check your configuration file for the value you've assigned to the hopper at 4.
2/ If you run the demo program and look at the "Dispensers" screen, it will show the value currently assigned to the hopper(s) and the address(es) of the hoppers. On this screen, hoppers that are defined but not connected will be shown as U/S.
If this still doesn't work, then please generate a Clean Log following these http://www.aardvark.eu.com/Private/Gene ... inkLog.pdf instructions, and attach the result.
Dave
1/ Can you double check your configuration file for the value you've assigned to the hopper at 4.
2/ If you run the demo program and look at the "Dispensers" screen, it will show the value currently assigned to the hopper(s) and the address(es) of the hoppers. On this screen, hoppers that are defined but not connected will be shown as U/S.
If this still doesn't work, then please generate a Clean Log following these http://www.aardvark.eu.com/Private/Gene ... inkLog.pdf instructions, and attach the result.
Dave
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.