Coin Value and Coin routing with MD100

claine_1 · Post by **claine_1** » Mon Jun 28, 2010 12:34 pm

Hi,
I am using a Merkur MD 100 Note-Recycler and I am trying to change the Value of the note-rolls. I am able to change the value like the demo does, but the Acceptor goes on putting the old notes in the dispenser rolls. While Paying out the dispenser things that the note he accepted, has the new Value.
e.g.: old Value of role 1 is 2000, new Value is 500. Putting a 2000-note in it, the note is put to role 1. While Paying out 500, the 2000-note comes out but the currentPayed()-function says 500 are payed out.
All Path-, DefaultPath- and PathSwitchLevel-attributes are 0.

The Problem also appears when i change the value with the Demo.

Do you have any idea what the problem is?

Christian Dieterich · Post by **Christian Dieterich** » Mon Nov 29, 2010 4:53 pm

where did you bought the MD100?

davebush · Post by **davebush** » Mon Jun 27, 2011 9:07 am

Hi,

I assume that by now you've found out that the MD100 cannot be re-configured from the cctalk bus. Any re-routing has to be by loading different firmware.

Dave

I'm sorry about the late reply - the BB system failed and didn't notify me of new posts.