Connect two or more JCM VEGA-RC devices to paylink (cctalk)

[desarrollo1]

Hi,

Is it posible to connect more than one JCM VEGA-RC (cctalk) to paylink?

If it is posible, how can I configure Standard.cfg?

This file come with 'Vega Recycler at 40' entrance for one JCM VEGA-RC.
I suppose additional devices have to go in other cctalk addresses.

Thank you.

[davebush]

So far as Paylink itself is concerned, there's no problem - as you suggest, you just add another line:
Vega Recycler at 41
below the current one.

Then you have to set the 2nd recycler to respond to messages addressed to 41!

Unfortunately, I don't know anything about the internals of the Vega - you'll have to contact JCM support to find out how to do that.

(If that can't be done, you could possibly re-configure them as ID-003 and connect each to a different RS232 port.)