Ingenico IUC180B

[Andrew]

Hi,
I tried to connect to Paylink an Ingenico IUC180B via MDB.
The .cfg is:
Protocol MDB on connector MDB
Cashless at 10h
this is the logpaylink.txt

14:19:28.274 DP: Cashless system at 2976setup
14:19:28.524 DP: Interface memory set up
14:19:28.571 Exec: DP task took 409 msec
14:19:28.571 10588 bytes memory free
...
14:19:28.571 MDB Cashless: Reader ID, Manu <ING>, Serial <20399943 >, Model <iUC1xxB >, S/W 0.4.1.8
14:19:28.571 MDB Cashless: Total Credit 0 in 0 transactions
14:19:28.571 DP: Cashless system at 2976 updated
14:19:28.571 MDB Cashless: Unit Disabled
14:19:28.571 MDB Cashless: ***Command Out of SequenceMDB Cashless: Cashless level 12, Currency 732, Scale 48, Response Timer 57, Options 39
14:19:28.571 MDB Cashless: Refundable, Not Multi Vend Capable, No Display, Does Vend / Cash Sale
14:19:28.571 MDB Cashless: Overriding 12 level to 2
14:19:28.711 MDB Cashless: Poll for 09H response

continuously repeated.

Thanks for any hint.

[davebush]

I suspect this an older version of the firmware.

Please try with this version: http://www.aardvark.eu.com/downloads/so ... 1-12-8.zip

[Andrew]

The firmware is up to date V4.1.12.8
I'm going to ask Ingenico for a suggestion

[davebush]

For anyone coming across this: it was actually a fault in the Paylink firmware, fixed in version 4-1-12-13