Hi Dave,
I'm a programmer from Odessos Colour Bulgaria.
I have a problem with reading acceptor and dispenser details.
When i turn off the power from Acceptor Coin an start Demo program and click the Acceptor button i see the same device,but his power is turned off.
When i run the program AESReset wait several minutes and start the Demo all is OK i see one device.What happen when i run AESReset?
Have i need every time run AESReset program for refresh connected device status?
Regards
Seyfo
MCL PCI Card
Moderators: aardvark, davebush, Admin
Hi Seyfo,
I am sorry if it doesn't match your system design, but there is no concept within the PCI card of changing the acceptor configuration whilst running. The design assumes that the peripheral configuration is fixed - hence a powered off acceptor is assumed to temporarily faulty, rather than missing. When you reset the card, the firmware then re-examines the configuration, and this time there is no acceptor.
The next version of the firmware (currently under alpha test) has an error reporting channel, which would notify you of the "failure" of the acceptor, but the card would still regard the failed acceptor as part of the configuration.
If you think this testing version would help your system, let me know.
Dave
I am sorry if it doesn't match your system design, but there is no concept within the PCI card of changing the acceptor configuration whilst running. The design assumes that the peripheral configuration is fixed - hence a powered off acceptor is assumed to temporarily faulty, rather than missing. When you reset the card, the firmware then re-examines the configuration, and this time there is no acceptor.
The next version of the firmware (currently under alpha test) has an error reporting channel, which would notify you of the "failure" of the acceptor, but the card would still regard the failed acceptor as part of the configuration.
If you think this testing version would help your system, let me know.
Dave
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.