We are using the PCI card in a dutch machine, which requires a Mars 9500 coin mech. I am trying the coin mech in the DEMO program supplied in the SDK.
The coin mech is working, and I can tell the mech to route coins to wherever I want to, but I am having problems with the PathLevelSwitch variable.
Does this variable work with the DEMO program and 9500 acceptor ?
If you have any ideas, they would be most appreciated !!
9500 and Milan Card
Moderators: aardvark, davebush, Admin
So far as I know it should all just work!
I suggest you download the diagnostics program from this site http://www.aardvark.eu.com/products/milan/downloads.htm and check the trace as the switch level is approached and passed. Although the diagnostics are not documented, they may give you a clue as to what is happening.
If you feel they show a problem / mystery then e-mail / post the trace to me. (There is a button for this purpose!)
I suggest you download the diagnostics program from this site http://www.aardvark.eu.com/products/milan/downloads.htm and check the trace as the switch level is approached and passed. Although the diagnostics are not documented, they may give you a clue as to what is happening.
If you feel they show a problem / mystery then e-mail / post the trace to me. (There is a button for this purpose!)
Aardvark software developer. Please put all communication on the problem through the board for the benefit of others.