Documentation mismatch : PayLink lite switches are wrong

el_es_cr · Post by **el_es_cr** » Tue Jan 27, 2009 4:26 pm

Hi,
discovered this in Paylink Lite switches drawing (WMH/704) in 4-1-10-9 Distribution :

the drawing shows the correct idea of the layout of cables in Connector 1 (bottom being 1, then 2,3,4, however there are no colors described there), but the description table is wrong (connector 1 pin 1 should be switch 2 (pink) and connector 1 pin 3 should be switch 1 (brown) ), for the connector oriented to resemble the drawing.

Only discovered that when measuring the voltage on Paylink' Lite's pins.#

The Paylink Lite Demo Kit also ships this one done wrong (and one has 50% chance to get it right, so I only noticed this when preparing my own looms).

Please consider amending it :)

davebush · Post by **davebush** » Mon Mar 09, 2009 6:16 pm

Thanks for the advice.

The latest SDK now documents the correct loom in it.